Hypothesis testing is a statistical inference technique that uses a sample to give probabilistic conclusions on the underlying population.
In scientific methodology, a core assumption is a proposition that is either logically true or accepted as a fundamental principle for pragmatic use, thus rarely examined.
In contrast, a working assumption is a statement used to construct scientific theories. Working assumptions cannot be logically false or logically true; it should be falsifiable and frequently examined. You start from an assumption that you believe is at least partially true, while results will confirm, suggest modification to, or reject your assumption.
In statistics, a hypothesis is a statement about population parameters \(\theta\). Typically we have two mutually exclusive hypotheses:
Hypothesis test is a rule that specifies for every possible sample \(\mathbf{X}\) whether to reject or passively accept the null \(H_0\). Theoretically, a hypothesis test is an indicator function that divides the sample space into a rejection region and an acceptance region. In practice, we design a test statistic \( W(\mathbf{X})\) of the sample and define rejection thresholds on the space of the test statistic.
If the test statistic of the given sample falls beyond the threshold, we claim the alternative hypothesis is statistically significant, where the significance level (aka size) \( \alpha \) of a test is the probability of the test statistic falling beyond the rejection thresholds if the null hypothesis is true. Instead of reporting a binary along with the significance level, a more refined measure is the p-value. The p-value of a test statistic is the probability of it being at least as deviant (away from center) as the observed value, if the null hypothesis is true: \[ p(w) = P(W > w \mid H_0) \]
A typical hypothesis testing procedure:
Errors occur in hypothesis testing whenever the test conclusion differs from the truth, which cannot be eliminated in a probabilistic setting. The probabilities of errors can be conditioned either on truth or on test conclusions.
Table: Truth-Test Contingency
| Frequencies | Test Negative, \(N^0\) | Test Positive, \(N^1\) |
|---|---|---|
| True Negative, \(N_0\) | true negative, \(N_0^0\) | false positive, \(N_0^1\) |
| True Positive, \(N_1\) | false negative, \(N_1^0\) | true positive, \(N_1^1\) |
The significance level \( \alpha \) and the power \( 1 - \beta(\theta) \) of a hypothesis test are the probabilities of false and true positives conditioned on truth, where the latter depends on the true population parameter \(\theta\). Type I Error, aka false discovery rate (FDR), and Type II Error are the probabilities of false positives and false negatives conditioned on test conclusions.
\[\begin{aligned} \alpha = N_0^1 / N_0 && \text{Type I error} = N_0^1 / N^1 \\ \beta(\theta) = N_1^0 / N_1 && \text{Type II error} = N_1^0 / N^0 \end{aligned}\]
Denote the prevalence of true positives among test candidates as \( p_1 = N_1 / N \), the error probabilities are related as: \[\begin{aligned} \text{Type I error} &= \frac{(1-p_1)\alpha}{(1-p_1)\alpha + p_1(1-\beta)} \\ \text{Type II error} &= \frac{p_1 \beta}{(1-p_1)(1-\alpha) + p_1 \beta} \end{aligned}\]
Common convention sets significance level \( \alpha = 0.05 \), power \( 1 - \beta(\theta) = 0.8 \), and type I error \( \text{FDR} = 0.1 \).
The t-statistic under null \( H_0: \hat{\beta}_i = \beta^{*} \) is:
\[ t = \frac{\hat{\beta}_i - \beta^{*}}{\widehat{\text{s.e.}}(\hat{\beta}_i)} \]
F-statistic:
\[ F = \frac{\text{MSS} / p}{\text{RSS} / (n - p - 1)} \]
likelihood ratio statistic
likelihood ratio test
Def: Nuisance parameter
Def: unbiased
uniformly most powerful (UMP) test
Thm: (Neyman-Pearson)
monotone likelihood ratio (MLR)
Thm: (Karlin-Rubin)
Wald, LM, LR, J
Analysis of variance (ANOVA) is a collection of multivariate statistical methods originally used to analyze data obtained from (agricultural) experiments. The design of experiment affects the choice of analysis of variance method.
Analysis of variance as defined in Merriam-Webster:
analysis of variation in an experimental outcome and especially of a statistical variance in order to determine the contributions of given factors or variables to the variance. (First use: 1918)
Analysis of variance is fundamentally about multilevel modeling: each row in the ANOVA table corresponds to a different batch of parameters, along with inference about the standard deviation of the parameters in this batch.
structuring of parameters/effects into batches
ANOVA F-statistic: MSS/RSS, normalized.
ANOVA decomposes the variance (total sum of squares, TSS) into component sums of squares: factor sum of squares and residual sum of squares. ANOVA is closely related to regression analysis: recall that a fitted regression model split TSS into model sum of squares (MSS) and residual sum of squares (RSS). Indeed, it can be seen as a special case of generalized linear models: independent variables in analysis of variance become dummy variables for a regression model.
Multi-factor ANOVA is used to detect significant factors in a multi-factor model.
The ANOVA table is a standard report of an analysis of variance, which provides sum of squares and also a formal F-test for the factor effect. One-way ANOVA is an omnibus test that determines for several independent groups whether any of their group means are statistically significantly different from each other. The one-way ANOVA F-test is a generalization of the two-sample t-test, which are identical (in particular, \(F = t^2\)) when there are only two groups. As an omnibus test, ANOVA does not have the problem of increased Type I error probability in multiple t-tests.
Three main assumptions of ANOVA test:
Non-parametric alternative: Kruskal-Wallis H-test.
To determine which specific groups differ from one another, you need to use a post hoc test:
Factor is a categorical/discrete variable; level is a possible value of a factor. A contrast is a linear combination of factor level means whose coefficients sum to zero. Two contrasts are orthogonal if these coefficients are orthogonal. Simple contrast is the difference between two factor means.
multiple comparison, a more formal analysis for comparing individual batch means.
Fixed effects and random effects have many incompatible definitions, but it is better to keep the terminology simple and unambiguous. An effect/coefficient in a multilevel model is constant ("fixed effect") if it is identical for all groups in a population; varying ("random effect") if it is allowed to differ from group to group. {Gelman:2005. Annals of Statistics.}
Consider the number of test statistics \(N\). Classical testing theory involves a single test statistics, i.e. \( N=1 \). Since the 1960s, a theory of multiple testing try to handle ((N\) between 2 and perhaps 20. Large-scale testing deals with thousands or more simultaneous hypothesis tests {Efron2004}.
Single tests depend on the theoretical null distribution purely frequentist long-run property
Family-wise error rate (FWER) is used to control the probability of making any false rejection among the \(N\) simultaneous tests. Common FWER include Bonferroni bound and Holm's procedure, both are very conservative (hard to obtain statistical significance).
False-discovery rate (FDR) has become the standard control criterion for large-scale tests. \(\widehat{\text{fdr}}\), \(\widehat{\text{Fdr}}\),
Decision rule \(D_q\): reject all samples such that \( p_{(i)} / i \le q/N \), where \( (i) \) is the ordered index. The Benjamini–Hochberg FDR Control Theorem shows that the decision rule controls FDR at level \(\pi_0 q\), which is bounded above by \(q\):
If the p-values corresponding to valid null hypotheses are independent of each other, then \( \text{FDR}(D_q) = \pi_0 q \), where \(\pi_0 = N_0 / N\) is the prevalence of negatives.
🏷 Category=Statistics